home *** CD-ROM | disk | FTP | other *** search
- Date: Tue, 8 Nov 94 04:30:11 PST
- From: Info-Hams Mailing List and Newsgroup <info-hams@ucsd.edu>
- Errors-To: Info-Hams-Errors@UCSD.Edu
- Reply-To: Info-Hams@UCSD.Edu
- Precedence: List
- Subject: Info-Hams Digest V94 #1198
- To: Info-Hams
-
-
- Info-Hams Digest Tue, 8 Nov 94 Volume 94 : Issue 1198
-
- Today's Topics:
- (none)
- ARLP045 Propagation de KT7H
- Dentron Digital Display board
- FW: Falkland Is. Shipping
- Hats off to VE's
- Help - Ham Radio for RC Aircraft
- Need callbook info of UK ham G8HUY
- Omni VI->PK232 hook up
- switching power supplies, why or why not?
- TA-33Jr power?
-
- Send Replies or notes for publication to: <Info-Hams@UCSD.Edu>
- Send subscription requests to: <Info-Hams-REQUEST@UCSD.Edu>
- Problems you can't solve otherwise to brian@ucsd.edu.
-
- Archives of past issues of the Info-Hams Digest are available
- (by FTP only) from UCSD.Edu in directory "mailarchives/info-hams".
-
- We trust that readers are intelligent enough to realize that all text
- herein consists of personal comments and does not represent the official
- policies or positions of any party. Your mileage may vary. So there.
- ----------------------------------------------------------------------
-
- Date: 8 Nov 94 11:31:43 GMT
- From: toms@hpsctma.NETh.hp.COM (Tom Staal)
- Subject: (none)
-
- subscribe info-hams
-
- ------------------------------
-
- Date: Fri, 04 Nov 1994 19:14:29 EST
- From: w1aw@arrl.org
- Subject: ARLP045 Propagation de KT7H
-
- SB PROP @ ARL $ARLP045
- ARLP045 Propagation de KT7H
-
- ZCZC AP59
- QST de W1AW
- Propagation Forecast Bulletin 45 ARLP045
- From Tad Cook, KT7H
- Seattle, WA November 4, 1994
- To all radio amateurs
-
- SB PROP ARL ARLP045
- ARLP045 Propagation de KT7H
-
- Solar activity was up last week, with the flux almost hitting 100.
- Last weekend a coronal hole and the effects of a flare combined to
- give us several days of high A indices in the thirties. Conditions
- have calmed a bit, although there is still the possibility of more
- coronal hole caused disturbances this month. The worst period will
- probably be around November 19 and 20. Look for the solar flux to
- peak again near 100 around November 24 through 26.
-
- For the CW Sweepstakes Contest this weekend we will probably have
- decent conditions, with solar flux at 90 or slightly lower.
-
- Sunspot Numbers for October 27 through November 2 were 87, 90, 92,
- 93, 89, 81 and 67, with a mean of 73. 10.7 cm flux was 93.1, 97.4,
- 98, 98, 96.6, 92.3 and 91.4, with a mean of 95.3.
-
- This week we have a special pair of domestic path projections for
- the Sweepstakes Contest.
-
- For the path from California to New England, look for 80 meters to
- open from 0000z to 1230z, and 40 meters from 2200z to 0230z 0630z to
- 0900z, and from 1200z to 1430z. 20 meters looks good from 1500z to
- 2100z. There is a slight chance of 15 meters opening over this path
- around 1700z to 2000z.
-
- The path from Texas to Ohio should be good for 80 meters from 2130z
- to 1430z, and 40 meters around the clock, peaking around 2300z to
- 1200z. 20 meters should be open from 1500z to 2130z. 15 meters
- might be open from 1730z to 2030z.
- NNNN
- /EX
-
- ------------------------------
-
- Date: 8 Nov 94 11:46:53 GMT
- From: hysell@itc.Kodak.COM (John D. Hysell)
- Subject: Dentron Digital Display board
-
- Hi all;
- Does anyone have any information on the Dentron digital display board that
- Dan's Small Parts and Kits sells? Dan includes a parts placement and a
- schematic diagram, but no backgound info, usage info or troubleshooting ideas.
- Any pointers to a magazine article, etc would be very helpful.
- -thanks and 73
- de KF2XC, John
- hysell@kodak.com
-
- ------------------------------
-
- Date: Sat, 5 Nov 1994 22:45:06 GMT
- From: dearnshaw@worldbank.org
- Subject: FW: Falkland Is. Shipping
-
- ----------
- > From: dx-request
- > To: dx
- > Subject: Falkland Is. Shipping
- > Date: Wednesday, November 02, 1994 5:56AM
- >
- > I am trying to purchase and send a 20 mtr monobander for shipment to the
- > Falkland Islands. The vendor does not know how to ship to the Falklands
- > (neither do I). Any suggestions would be appreciated.
- >
- > Jim - W4MWT HBXH55A@prodigy.com
- >
-
- It would probably be better to ship via the United Kingdom. There might be
- delays shipping via Argentina, and I don't know if there is a regular mail
- service directly between the two countries since the hostilities. There are
- frequent flights to/from the U.K.
-
- ------------------------------
-
- Date: Mon, 7 Nov 1994 16:32:40 GMT
- From: ae517@FreeNet.Carleton.CA (Russ Renaud)
- Subject: Hats off to VE's
-
- In a previous article, jdgan@freenet3.scri.fsu.edu (James Ganyard) says:
-
- >How can anyone complain about the monetary charges of VE's? Maybe
-
- Yes! I agree 100 percent. Hats off to VE's (and VA's too), we're a swell
- bunch of hams up here in VE-land! <grin nyuk, yuk, yuk)
-
- va3rr (a really swell VE, or so my friends say)
- (ready to dodge the barrage of over-ripe vegetables lobbed in the direction
- of my light-weight satire)
-
- ------------------------------
-
- Date: Mon, 7 Nov 1994 16:46:02 GMT
- From: zlau@arrl.org (Zack Lau (KH6CP))
- Subject: Help - Ham Radio for RC Aircraft
-
- DL5UH moritz@ipers1.e-technik.uni-stuttgart.de wrote:
- : >I am trying to get some information on RC aircraft controllers
- : >using Ham Radio frequencies.
- : >
- : >2. What are the disadvantages?
- : >
- : Surprizing question: the answer is, that someone will
- : ground your plane, if he gets annoyed by the interference.
-
- : Aside from regulations *I* would nou take the risk.
- : I allways thought there were special bands for RC??
-
- Sorry to hear that things are so bad in Germany.
-
- I've not heard of any problems in the USA. The
- primary disadvantage is one of cost--manufacturers
- only provide an amateur band option (6 meters) on
- their most expensive models.
-
- There has been a push by the AMA, Academy of Model
- Aeronautics for better receivers, allowing multiple
- planes to fly at the same field with minimal
- interference. I think there were plans to phase out
- the old receivers, but this hasn't happenend.
-
- The band plan has space for both the older and
- newer gear.
- --
- Zack Lau KH6CP/1 2 way QRP WAS
- 8 States on 10 GHz
- Internet: zlau@arrl.org 10 grids on 2304 MHz
-
- ------------------------------
-
- Date: Mon, 7 Nov 1994 16:53:46 GMT
- From: dgf@netcom.com (David Feldman)
- Subject: Need callbook info of UK ham G8HUY
-
- I am trying to contact G8HUY and have been unsuccessful by packet, so
- I'd like to try snailmail.
-
- Could someone look up his recent info and pass it to me by e-mail at
- dgf@netcom.com?
-
- Thanx
-
- 73 Dave WB0GAZ dgf@netcom.com
-
- ------------------------------
-
- Date: 7 Nov 94 11:29:01 -0600
- From: jmg@tntech.edu (Jeff Gold)
- Subject: Omni VI->PK232 hook up
-
- Help would be appreciated.
-
- I would like to hook up my PK232 to my Omni VI using the FSK mode.
- If anyone has successfully done this, I would greatly appreciate
- the details. In my 232 manual it says something about needing a
- resistor for this mode.. but may be outdated or not apply to the
- Omni VI.. but want to make sure.
-
- I believe that the FSK mode is best for PACTOR, RTTY.. it was on
- my Kenwood 850 because you then could use the filters. I have
- purchased the digital filter for the VI and want to make sure I
- can use it.
-
- thanks in advance for any help
-
- 73
- Jeff, AC4HF
-
- ------------------------------
-
- Date: Tue, 8 Nov 1994 00:22:30 GMT
- From: gary@ke4zv.atl.ga.us (Gary Coffman)
- Subject: switching power supplies, why or why not?
-
- In article <39m1vi$5to@larry.infi.net> kr4jb@news.infi.net (Alan Porter) writes:
- >
- >I currently use a 20-amp Astron power supply for my HF rig and a
- >car battery for my 2m/440 mobile. Is there any reason why you
- >should or should not use a "switching power supply" from a PC
- >for powering a radio? What are the differences between the P/S's
- >that I use and the ones in PC's?
-
- Well, a PC supply only puts out a couple of amps of 12 volts, and
- it *needs* a load on the 5 volt output or it'll go out of regulation.
- So it's not really a practical option for most uses. Switching
- supplies *in general* are efficient and light, but they are more
- subject to generating RFI and more subject to being disturbed by
- RF. That's why I prefer the old brute force designs like the
- Astron.
-
- Gary
- --
- Gary Coffman KE4ZV | You make it, | gatech!wa4mei!ke4zv!gary
- Destructive Testing Systems | we break it. | emory!kd4nc!ke4zv!gary
- 534 Shannon Way | Guaranteed! | gary@ke4zv.atl.ga.us
- Lawrenceville, GA 30244 | |
-
- ------------------------------
-
- Date: 7 Nov 1994 13:10:10 -0800
- From: zardoz@ornews.intel.com (Jim Garver)
- Subject: TA-33Jr power?
-
- In article <39e08o$5ge@maggie.austin.wireline.slb.com>,
- Wayne Wright <w5xd@slb.com> wrote:
- >Has anyone ever destroyed a Moseley TA-33Jr by running more than the
- >rated 300W to it?
-
- I have a TA-32jr 2 element beam that I used to run a Heathkit SB-200
- into. This put out about 500-600 watts on the higher bands. I fed it
- with about 50 feet of RG-58 also. No problems.
- Check the traps for spider nests, connector corrosion, etc. and use
- Pentrox, available from Mosely, on all sleeves and joints. An
- excellent antenna, IMHO.
-
-
-
- --
- zardoz@ornews.intel.com WA7LDV "Each day is like a crisp new dollar bill.
- I speak only for myself. How will you spend it?" - Barnaby Jones
-
- ------------------------------
-
- Date: 7 Nov 94 19:58:45 GMT
- From: grw1@pge.com (Gary Wescom)
-
- References<CyB5vA.9w8@news.Hawaii.Edu> <38v7pf$f8e@jupiter.planet.net>, <390p0s$pt6@chnews.intel.com>
- Subject: Re: Questions on this and that
-
- In article <390p0s$pt6@chnews.intel.com> Cecil_A_Moore@ccm.ch.intel.com writes:
- >From: Cecil_A_Moore@ccm.ch.intel.com
- >Subject: Re: Questions on this and that
- >Date: 30 Oct 94 18:35:08 GMT
-
- >In article <38v7pf$f8e@jupiter.planet.net>,
- >Bill Sohl Budd Lake <billsohl@earth.planet.net> wrote:
- >>
- >>This (the shave & a haircut story) sounds like pure myth to me.
- >>Anyone have any actual references (i.e. QST articles/story) to
- >>back up this claim? Not meant as a flame, just want to
- >>validate this story.
-
- >Hi Bill, I can tell it like it was in the early 50's when I was a Novice
- >(WN5DXP). The shave-and-a-haircut...six-bits thing was not used in place
- >of a CQ. It was used only at the very end of a CW QSO after both stations
- >had signed their 73's. It went like this:
-
- >Station#1: ... 73 73 shave-and-a-haircut
-
- >Station#2: six-bits shave-and-a-haircut
-
- >Station#1: six-bits
-
- >Over the years the shave-and-a-haircut part has been dropped and only the
- >six-bits part remains. But in the early 50's, the majority of Novices signed
- >as Stations 1 & 2 above. I've never heard shave-and-a-haircut used in place
- >of CQ but I was inactive on CW from the mid-50's to the mid-80's.
-
- >--
- >73, Cecil, KG7BK, OOTC (All my own personal fuzzy logic, not Intel's)
-
- I was a novice in 1961. While shave-and-a-haircut was used as described
- above, what did happen occasionally was after two stations signed with the
- ". ... ." ". ." sequence, a third might jump in with the same to try to
- contact one of the previous qsoing stations. This is occasionally heard today
- with a third station echoing the ". ." of the signing stations.
-
- Back in the early 60's though, "QRL?" was hardely ever heard and certainly I
- never heard in on the novice bands. Instead, a novice might use ". ... ." to
- mean the same thing as "QRL?". With the poor selectivity of the receivers we
- were using, a ". ... ." transmission really stood out and probably got as much
- attention as a CQ (I could monitor a 25 Khz chunck of the 40 M novice band
- without retuning with my old SX-17). I know that a significant percentage of
- my novice QSOs were started that way.
-
- The operating practices on the novice bands in 1961 are certainly different
- from those used today. They were adapted to the crystal controlled
- transmitter, broad as a barn door receiver selectivity, and 5 to 7 WPM
- operating speeds of that day. It worked just fine then. I wouldn't try to
- use those procedures today.
-
- Gary Wescom N6CH
- grw1@pge.com
-
- ------------------------------
-
- Date: 7 Nov 1994 18:48:29 GMT
- From: hanko@wv.mentorg.com (Hank Oredson)
-
- References<396mun$j39@hpbab.wv.mentorg.COM> <1994Nov2.032455.26815@news.csuohio.edu>, <39c3fh$3te@ccnet.ccnet.com>
- Reply-To: Hank_Oredson@mentorg.com
- Subject: Re: NoCal OO goes after Packet BULLetins
-
- In article <39c3fh$3te@ccnet.ccnet.com>, rwilkins@ccnet.com (Bob Wilkins n6fri) writes:
- |> Steve Wolf (sww@csuohio.edu) wrote:
- |>
- |> : But is is broadcasting none the less.
-
- <remaining errent nonesense elided>
-
- |> In the event you are serious in your interpretations of the rules, do you
- |> plan to close down your operations on tcp/ip and public pbbs stations?
-
- <most of the reasonable response also elided>
-
- |> Lets see ... I have set my Beacon Text to _Cookies are good with Milk_ and
- |> I am digipeating this every seven minutes through four digipeaters in the
- |> area. Who is violating which rules?
-
- Clearly, you violate my rule "Cookies are good with cocoa."
-
- How dare you attempt to convert people to the dark side with
- that CLEARLY INCORRECT beacon?
-
- (Let's bring this discussion back up to third grade level
- where it clearly belongs)
-
- ... Hank
-
- --
-
- Hank Oredson @ Mentor Graphics Library Operations
- Internet : hank_oredson@mentorg.com "Parts 'R Us!"
- Amateur Radio: W0RLI@W0RLI.OR.USA.NOAM
-
- ------------------------------
-
- End of Info-Hams Digest V94 #1198
- ******************************
-